|
||||||||||||||||||||||||||||
|
LCD Display
The remote LCD displays connect to Pulse Output WattNodes to display power (watts or kilowatts) and/or energy (kilowatt-hours). You can panel mount the display in service panels, junction boxes, or any other panel up to 5mm (0.2") thick. Using the adjustable decimal point and scale factor, you can display almost any desired resolution or range.
The energy display shows accumulated watt-hours (WH), kilowatt-hours (kWH) or megawatt-hours (MWH). The scale factor and decimal point can be adjusted to display in the following units: WH, hundredths of kWH, tenths of kWH, kWH, or thousandths of MWH. With appropriate scale factors, the display overflow interval (from all 9's back to 0) can be set from less than a year to over a hundred years. The power display shows the current power consumption in watts or kilowatts. The combo display toggles between displaying power and energy at the press of a button. The energy total can be reset either by pressing the 'RST' button or with a remote wired reset button. To prevent unauthorized resetting, the front panel reset button can be disabled. The remote reset connects to the rear screw terminals. If a locking NEMA enclosure is used, then a key switch can be connected to the remote reset, allowing reset only with the use of a key. SPECIFICATIONSDisplay Scaling
Mechanical
Environmental
Electrical
List prices for 1 piece quantities. Call for pricing on larger quantities. Effective January 1, 2008.
Manual and Application Notes
©Copyright 2008 Continental Control Systems, LLC. All Rights Reserved. |
|||||||||||||||||||||||||||